100mm Wall Extractor Fan Kit Ventilation System with Termostat

Description

100mm Extractor Fan Kit with Thermostat
It is designed to supply warm air from the room with a heat source (such as a closed fireplace or a wood-fired stove) to an adjoining room.
If this product is installed near a heat source, the properly set thermostat will activate the exhaust fan to transfer warm air into the other room.
The fan will switch off when the temperature drops in the room with a heat source.
The applied ball bearings significantly extend fan’s vitality (up to 30 000 hours) and simultaneously reduce electricity consumption.
Specification:
Voltage: 240V/50Hz
Consumption: 7W
Max Flow Rate: 60m3/h
Protection class: IP-X4
Max Noise Level: 34Db
100mm Extractor Fan Kit with Thermostat   It is designed to supply warm air from the room with a heat source (such as a closed fireplace or a wood-fired stove) to an adjoining room. If this product is installed near a heat source, the properly set thermostat will activate the exhaust fan to transfer warm air into the other room. The fan will switch off when the temperature drops in the room with a heat source. The applied ball bearings significantly extend fan’s vitality (up to 30 000 hours) and simultaneously reduce electricity consumption.   Specification:   Voltage: 240V/50Hz Consumption: 7W Max Flow Rate: 60m3/h Protection class: IP-X4 Max Noise Level: 34Db
100mm Extractor Fan Kit with Thermostat   It is designed to supply warm air from the room with a heat source (such as a closed fireplace or a wood-fired stove) to an adjoining room. If this product is installed near a heat source, the properly set thermostat will activate the exhaust fan to transfer warm air into the other room. The fan will switch off when the temperature drops in the room with a heat source. The applied ball bearings significantly extend fan’s vitality (up to 30 000 hours) and simultaneously reduce electricity consumption.   Specification:   Voltage: 240V/50Hz Consumption: 7W Max Flow Rate: 60m3/h Protection class: IP-X4 Max Noise Level: 34Db
100mm Extractor Fan Kit with Thermostat   It is designed to supply warm air from the room with a heat source (such as a closed fireplace or a wood-fired stove) to an adjoining room. If this product is installed near a heat source, the properly set thermostat will activate the exhaust fan to transfer warm air into the other room. The fan will switch off when the temperature drops in the room with a heat source. The applied ball bearings significantly extend fan’s vitality (up to 30 000 hours) and simultaneously reduce electricity consumption.   Specification:   Voltage: 240V/50Hz Consumption: 7W Max Flow Rate: 60m3/h Protection class: IP-X4 Max Noise Level: 34Db
100mm Extractor Fan Kit with Thermostat   It is designed to supply warm air from the room with a heat source (such as a closed fireplace or a wood-fired stove) to an adjoining room. If this product is installed near a heat source, the properly set thermostat will activate the exhaust fan to transfer warm air into the other room. The fan will switch off when the temperature drops in the room with a heat source. The applied ball bearings significantly extend fan’s vitality (up to 30 000 hours) and simultaneously reduce electricity consumption.   Specification:   Voltage: 240V/50Hz Consumption: 7W Max Flow Rate: 60m3/h Protection class: IP-X4 Max Noise Level: 34Db
100mm Extractor Fan Kit with Thermostat   It is designed to supply warm air from the room with a heat source (such as a closed fireplace or a wood-fired stove) to an adjoining room. If this product is installed near a heat source, the properly set thermostat will activate the exhaust fan to transfer warm air into the other room. The fan will switch off when the temperature drops in the room with a heat source. The applied ball bearings significantly extend fan’s vitality (up to 30 000 hours) and simultaneously reduce electricity consumption.   Specification:   Voltage: 240V/50Hz Consumption: 7W Max Flow Rate: 60m3/h Protection class: IP-X4 Max Noise Level: 34Db