-40%
HYSKORE 30022 Parallax Rifle Sighting and Cleaning Rest
HYSKORE 30022 Parallax Rifle Sighting and Cleaning Rest
HYSKORE 30022 Parallax Rifle Sighting and Cleaning Rest
HYSKORE 30022 Parallax Rifle Sighting and Cleaning Rest
HYSKORE 30022 Parallax Rifle Sighting and Cleaning Rest

HYSKORE 30022 Parallax Rifle Sighting and Cleaning Rest

$ 23.75

Availability: 100 in stock
  • Country/Region of Manufacture: China
  • Model: 30022 Parallax Rifle Sighting and Cleaning Rest
  • Condition: This is a factory refurbished customer return it may have some very minor cosmetic issues such as a small ding, scrape or wear mark, all functions have been tested and are 100% as original. All contents have been inspected and are 100% complete. We pull from the top of the pile.
  • Type: Shooting Rest
  • MPN: 30022
  • All returns accepted: ReturnsNotAccepted
  • Brand: HySkore

    Description

    Hyskore®                                                       30022
    Parallax Rifle Sighting System
    And Cleaning Vise
    3 SHOTS ~ 5 MINUTES ~ SIGHTED IN!
    Always Use Appropriate Eye & Ear Protection When Using This Device!
    This system will allow you to sight-in in 5 shots or less. You only need to be able to follow the instructions & be able to shoot a reasonable group. Here?s how it works. You aim at a fixed point (target or bullseye) & carefully fire a 3-5 shot group. You have now established the
    POINT OF IMPACT
    versus the
    POINT OF AIM
    . Now clamp the gun in the vise and
    USE THE ADJUSTMENTS ON THE VISE
    to center the reticle (red dot or cross-hairs) on the point of aim (target).
    WITHOUT MOVING THE
    GUN OR THE VISE
    use the adjustments on the sight to move the reticle to the center of the group. You have just mechanically and optically aligned the points of aim and impact i.e., you?re on target.
    SAFETY WARNING
    This Rest is designed to be used for cleaning and sighting only.
    The gun should never be fired when clamped in the vise.
    Loading the rest with sandbags or bags of shot and then firing a gun that is clamped in the vise will probably damage the rest beyond repair and cause damage to your gun.
    If this doesn?t impress you, the improperly supported gun may
    rotate upwards and to rear potentially resulting in serious Injury
    SIGHTING IN
    Make a target. We suggest using a marker to make a cross + on a piece of plain white paper (or the back side of a standard target). This will make it much easier to identify the center of the point of aim. Set Target 50 - 100 yards away. (The target can be downloaded from our website)
    Shoot a 3- 5 shot group. At this point UNLOAD THE GUN. If your group is off the paper move the target closer to the gun.
    Mark Center of group. High visibility dots work best!
    With Gun Unloaded
    -Place it in the vise & clamp it in place. Locate the vise in the same approximate location as when you fired your group. Remove the adjusting caps from the sight.
    Using the elevation adjustments on the vise and by moving the vise from side to side set the reticle on the center of the + mark (Target).
    (THIS IS VERY IMPORTANT) WITHOUT MOVING THE GUN OR VISE
    adjust the windage & elevation screws on the sight until the reticle is centered on
    the mark at the center of the group
    . THE GUN IS NOW SIGHTED IN!
    The set includes padded V notch, magnetic spirit level, Velcro straps and utility tray.
    We ship
    only
    to the lower 48 states.  This does NOT include, repeat, does NOT include Alaska, Hawaii, Puerto Rico, Guam, The Virgin Islands, etc.
    Sometimes an item arrives damaged due to the shipping process.  (Think Ace Ventura Pet Detective.) We have no control over this.  However, for all items that are not on our discontinued list we have replacement parts which we would send out to you to correct any shipping issues.  For items that are discontinued, parts may or may not be available and we will indicate accordingly.
    All of our items are fairly large and are packed 1 to the shipping carton.  Therefore, it is impossible for us to combine shipping.  In fact, shipping the boxes one by one would be less expensive than putting them both together in one box which would involve extra charges for the box and packing and also due to a larger volume a higher freight cost.
    Finally, we do not set the shipping charges.  The shipping charges are set by the eBay shipping charge calculator.  If you go into the calculator, enter your zip code, etc. the information you will get will be the exact same amount that you will be charged for shipping.  We have no control over this.
    At the end of the day we want you to be a happy customer and we do our very best to make sure that you get the item exactly as described.  If you have any questions we are available Monday through Friday 9 ? 4 Eastern Time to answer questions.  Our commitment for shipping is 5
    business
    days, but generally speaking, if we receive payment before noon eastern time we ship the next
    business
    day.  There are times when this has not happened due to extreme weather events which disrupt the UPS system and communications, such as, telephone and internet, due to power outages, or other events that may be beyond our control.  But you can rest assured that we want to get the item out of our hands as quickly as possible.  Thank you for your understanding.